Shandong Zhilin Environmental Protection Technology Co., Ltd.

Intelligent heat exchanger unit: Adjustment methods for intelligent heat exchanger units

Release time:

2020-10-27 11:50

Source:

Intelligent heat exchangers provide comfortable and efficient heating, saving energy and protecting the environment. They are especially suitable for installations with central heating systems or self-contained boilers, and are applicable to various locations using hot water and cooling systems. Its function is equivalent to a heat exchange station; any thermal engineering project requiring a heat exchange station can be replaced by an intelligent heat exchanger. The following is a brief introduction to the adjustment method of the intelligent heat exchanger. 1. Quality adjustment: By adjusting the flow rate of the primary heat source to change the supply water temperature of the secondary circulation. Controlling the secondary side supply water temperature and the outdoor temperature sensor signal, adjusting the opening of the primary side electric regulating valve, and changing the heat source flow rate,

Intelligent Heat Exchanger UnitProvides comfortable and efficient heating, energy-saving and environmentally friendly. It is particularly suitable for installations with central heating systems or self-contained boilers, and is applicable to various locations using hot water and cooling systems. Its function is equivalent to a heat exchange station; any thermal engineering requiring a heat exchange station can beIntelligent Heat Exchanger Unitreplaced. Below is a brief introductionIntelligent Heat Exchanger Unitof the adjustment method.

1. Quality adjustment: By adjusting the flow rate of the primary heat source to change the supply water temperature of the secondary loop. Control the secondary side supply water temperature and the outdoor temperature sensor signal, adjust the opening of the primary side electric regulating valve, change the heat source flow rate, and achieve the purpose of regulating the heating system heat load and saving heat.

2. Air volume adjustment: Adjust the flow rate of the secondary side circulating water pump through the frequency converter to achieve the purpose of adjusting the heat load. Although it saves operating costs, it easily causes hydraulic imbalance.

3. Quality adjustment: The electric valve regulates the heat source flow rate, and the frequency converter regulates the secondary side flow rate of the circulating water pump to achieve synchronous regulation of the secondary side circulating water temperature and flow rate. This method can save heat and electricity and is easy to manage.

The intelligent heat exchange unit can be automatically adjusted at any time to keep the system's heat load within a reasonable range. All heat exchange stations are under unified monitoring to ensure continuous operation and bring the heating system to an overall state, thus greatly saving system energy consumption.

Reasonable design and manufacturing areIntelligent Heat Exchanger Unitone aspect of energy-saving effects, while the other is its scientific operation and adjustment. Intelligent Heat Exchanger UnitIt is an optimized configuration and concentration of a set of independent heat exchange components. The design of each link takes energy saving into consideration. Just as the intelligent heat exchange unit has high heat exchange efficiency, its condensate temperature will also be higher than the condensate temperature. If the return water temperature of circulating water and steam condensate is not used, a large amount of heat will be wasted. Poor water quality will cause scaling in the pipe network, radiators, and heat exchange equipment, and its heat exchange efficiency will decrease year by year. Focusing only on selecting imported equipment with a high degree of automation cannot achieve good energy-saving effects.

Shandong Zhilin Environmental Protection Technology Co., Ltd. is a manufacturer of high-efficiency intelligent heat exchanger units. Welcome to purchase!

Intelligent heat exchanger unit: Introduction to the advantages of intelligent heat exchanger units

High-efficiency intelligent heat exchanger unit: Characteristics of intelligent heat exchanger units