Plate Heat Exchanger: Proper Maintenance and Care of Plate Heat Exchangers


Plate heat exchangers are common thermal devices that provide hot water conveniently and quickly. However, the equipment also requires proper maintenance to ensure stable operation. Many customers fail to achieve this due to improper methods.

  Shandong Zhilin Environmental Protection Technology Co., Ltd. is engaged in high-efficiency intelligent heat exchange units, intelligent heat exchange units, plate heat exchange units for heating, plate heat exchangers, detachable heat exchangers, high-temperature plate heat exchangers, high-efficiency plate heat exchangers, water-to-water plate heat exchangers, high-efficiency plate heat exchangers, gasket plate heat exchangers, detachable plate heat exchangers, steam-water high-efficiency plate heat exchangers, high-temperature plate heat exchangers, heat exchangers, plate heat exchangers, and manufacturers of detachable heat exchangers.

Plate heat exchanger

  Plate heat exchangerIt is a common type of thermal equipment that can efficiently supply hot water, conveniently and quickly. However, the equipment also needs proper maintenance to ensure its stable operation. Many customers fail to achieve this due to incorrect methods.

Manufacturer of detachable heat exchangers

  Zhilin recommends the following correct maintenance methods for plate heat exchangers:

 

  1. After stopping operation in winter, immediately drain the substances inside the plate heat exchanger, or adopt other anti-freezing measures to prevent equipment from freezing and cracking. Manufacturer of detachable heat exchangers

Heating unit

  2. If the equipment is not used for a long time, the clamping foot bolts should be released to a specification of no less than 1.15A. Clamp according to requirements when using.

 

  3. When the plate heat exchanger is running frequently, if substances are found discharged from the signal hole, analysis should be carried out immediately. If it is due to loose foot bolts or stretching due to long-term heat exchange, clamp again as required, but do not over-tighten to prevent crushing. If the seal is damaged, it should be replaced.

 

  Winter is here, and the temperature is getting lower and lower, so the plate heat exchanger should also adopt appropriate anti-freezing measures to ensure normal use.

 

  The above is the information collected by the editor of Shandong Zhilin Environmental Protection Technology Co., Ltd. Please contact us if needed.